No- you wont get the desired output by mixing these two oils. Because , both have different grades, 5w30 is more light and the density is less , and is intended for light usage (scooters). Whereas a 10w30 is a higer grade with more density and suitable for more higher capacity engines.
Generally, mixing oil weights is not recommended. But several viscosity grades are compatible and possible to mix, provided that they are under one motor oil brand. However, doing so will produce a new viscosity that is not the same as the original oil in the engine or the original oil to be added.
From the Chevron.com site: “Can I mix different viscosity grades of motor oils?” “Yes. It is always advisable to not mix motor oil brands, however, different viscosity grades of the same brand motor oil are compatible.
Can you mix 20 and 30 weight oil?
If it is a similar type of oil, say, engine oil, you can mixed the two…..and also provided that they are both mineral based oil or synthetic ones. You can mix a 5W20 with a 5W30 oil with minimal amount of issues provided it the same manufacturer and the same API classification.
Can I mix 5w30 and 10w40?
No, especially if it’s a different manufacturer. The additives could react with each other. At least you should use the same brand, but 10w40 is a bad oil, and if the engine requires 5w30, the 10w40 is too thick. It’s also not good, because that oil has about a third of it as oil thickeners.
Is mixing oils bad for your car?
Yes. If it’s something you do only occasionally, mixing shouldn’t damage your engine. Let’s say you want to top off your oil, just to keep you rolling until your next regularly scheduled maintenance check. Mixing is alright, if the oil you use is the weight (or viscosity) recommended in your owner’s manual.
What happens if you mix engine oil types?
Mixing different types can destabilize your motor oil, reducing its efficiency and affecting your engine’s performance. The smartest choice is to stick with the oil type and oil change intervals recommended by your car’s manufacturer and visit your local car care experts for affordable services.
What happens if you put in 5W-20 oil instead of 5W-30?
Mixing 5W-20 and 5W-30 (or any other oils for that matter) may lead to faster wear and tear of your engine and eventually cause problems with the basic functioning of critical engine parts. And even if your engine allows it, you won’t get any noticeable results by mixing different viscosity grade oils.
Can you put 5W-20 in a car that takes 5W-30?
Probably not. 5w20 oil is fairly light oil and is generally designed to work with newer engines. Motor oil has become part of a manufacturers program to allow engines to get higher fuel mileage. Lighter oils take less HP to pump through an engine than heavier oils.
What will happen if I put 5W-30 instead of 5w20?
If you mix 5w30 and 5w20, the oils will mix, but they will not blend into a single oil. So, they will stay separate and flow. Because the two oils have the same viscosity in freezing temperatures, they would both flow uniformly to the top ends.
Will thicker oil damage my engine?
Using oil that is thicker than recommended may lead to a decrease in fuel economy, a higher load on your engine, and even a shorter life for your engine. Conversely, using thinner, lighter-weight oil than recommended can cause excessive wear and shorter life.
Can you mix different oil viscosities?
There is nothing wrong with mixing oils of two different viscosities, but it is not the optimum condition. You can also mix oils of the same type (engine oils with engine oils, etc.) Remember, when getting an oil change, 15 to 20% of the old oil remains in the engine and mixes with the new oil.
What happens if you mix 10W 30 and 10W 40?
Mixing 10W30 with 10W40
Some say that mixing them is fine as long as you don’t live in freezing weather. Even if you put together synthetic and conventional blends of these motor oils, they show no harm to your vehicle. However, this is true only if you mix in a quart of the other type to your usual engine oil.
What happens if you put 10w40 instead of 5w30?
If you use 10-w-40 instead of 5-w-30 specified by the manufacturer then the viscosity of 10-w-40 used by you will be higher and oil thicker than what is specified during winters. Similarly the oil viscosity will be higher and oil thicker than specified during summers.
Is Thicker oil better for high mileage cars?
A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. As long as you’re not hearing knocking or serious mechanical noises from the engine, the heavier oil should buy you many more miles of service from your vehicle.
Can you mix same grade engine oil?
Mixing two oils that have equivalent properties will not pose a problem, but final performance cannot be guaranteed. All market oils (petrol engine or diesel, mineral or synthetic) are mixable. However, a blending of two oil qualities lower the superior quality.
Can I mix oils for deep frying?
Yes you can mix oils for frying, BUT ensure that they have a similar flavor profile. DO NOT be tempted to use Extra Virgin Olive oil as it has a strong flavor and is hard to mask.
Is it OK to mix different brands of synthetic motor oil?
Synthetic Oil Maker Recommendations
Synthetic oil makers state that it is an acceptable practice to mix synthetic oil from different manufacturers. In fact, synthetic oil can also be safely mixed with conventional oil.
Can I top up oil with different oil?
You can add any engine oil as long as it has the right specifications — preferably with an official approval of the OEM (Original Equipment Manufacturer). Not the brand, but the specification and viscosity indicated in your car’s manual are your reference for using the right oil.
