The many benefits of vinyl PVC beadboard include: Professional finish without the need to paint available in either white or cappuccino. Durable finish that resists scratches and dents. Water-resistant, virtually maintenance-free and will not rot.
How much does vinyl beadboard cost?
Beadboard Prices
Beadboard costs $0.50 to $1 per square foot and a contractor charges $4 to $6 per square foot to install it.
Can beadboard be used for ceilings?
A beadboard ceiling can be used to level out an uneven ceiling by adding shims. Although beadboard is typically thought of as a wall material, it’s great for ceilings as well, and it’s relatively inexpensive. By using tongue and groove beadboard, you can hide the nails for cottage feel with a seamless look.
Are beadboard ceilings expensive?
Beadboard is relatively affordable, compared to other professionally installed ceiling treatments, such as tray ceilings, which can easily cost in excess of $10,000. DIY beadboard kit systems can be installed by a homeowner with basic carpentry knowledge.
Is vinyl beadboard waterproof?
Unique and cost-effective, PVC (vinyl) beadboard planks are waterproof and easy to clean. While white is the most popular choice, this contemporary rendition of traditional beadboard comes in an assortment of colors.
What is PVC beadboard?
Beadboard PVC Sheet, with 2″ or 3″ on-centre beads. The sheet is 4′ wide x ½” thick, with a choice of length. The beads run along the length of the sheet, and each side of the sheet (running along the length of the sheet) has a shiplap edge, to form a seamless joint.
Which is cheaper beadboard or shiplap?
Beadboard is one of the least expensive wood panelings available – if you go with the premade 4’x8′ sheets. The cost for a 4’x8′ panel is about $0.72 per square foot, which is quite inexpensive, especially compared to some of the pricier options like wainscoting or shiplap.
Does beadboard have to go over drywall?
Beadboard installs over drywall with panel adhesive. While the adhesive cures, use brads or nails to hold the panels in place temporarily. Review scribing techniques: Because room corners are rarely plumb, it may be necessary to cut panels so that they conform to irregularities.
How do you secure a beadboard ceiling?
Adding a construction adhesive like liquid nails to the back of the beadboard panel helps it attach to the ceiling, especially when it has a rough texture like ours did. We used our support bracket to hoist the panel with adhesive up into place.
How do you install a 4×8 sheet of beadboard on a ceiling?
Measure the ceiling and locate the ceiling joists. You can use a stud finder or just drill holes in the drywall until you hit resistance.Cut down the beadboard (including cut outs for lights and vents). Install beadboard. Measure, cut, paint and install border boards. Add trim boards. Caulk, fill nail holes and paint:
What type of board is used for ceilings?
A variety of materials is used for constructing ceilings in a home. By far the most common today is the same as that used for walls—drywall (also known as gypsum wallboard or by the trade name Sheetrock).
Is beadboard out of style?
As far as I’m concerned, while things like herringbone floors, gently curved side splashes, and beadboard walls have never gone “out of style”, there’s no denying that these old world-esque additions are hot in the design world right now, and for good reason.
How much does a sheet of beadboard cost?
Expect to spend more than $1 per square foot on real beadboard, while panel alternatives range between $0.50 and $0.70 per square foot. Red oak beadboard averages $11 per square foot; maple averages $18 per square foot — and cherry averages as much as $22 per square foot, according to Cost Helper, as of 2011.
How do you hide the seams on a beadboard ceiling?
How to hide seams in Beadboard
Make sure beads and grooves line up. Attach beadboard firmly to surface. Apply wood putty. Clean wood putty out of grooves. Sand face and grooves. Decide if you can move forward or need to repeat a few steps. Prime. Paint.
How do you fasten PVC beadboard?
The first step toward installing PVC beadboard is to fasten it to the wall or ceiling. It can either be hand nailed or power nailed, just the same as wood. Your nails should be at least 1 1/2-inches long so that each one penetrates to a minimum of one inch.
Can vinyl beadboard be painted?
Coat the primed vinyl paneling with satin latex paint. Apply paint to the vinyl just as you did the primer. Wait 2 hours for the painted paneling to dry.
